?>

Our Projects

member name

Project :

Development of Training Modules for Customs Officers in E-waste management

Client :

Medical and Electronic Waste Management Project

Scope :

The project is to develop training modules aimed at raising awareness and building capacities of Customs and other relevant officers on illegal traffic of hazardous chemicals and waste under Stockholm, Basel, and Rotterdam conventions with a special focus on Electronic waste (E-waste) and Medical waste.

member name

Project :

Preparing the Environmental Register for the three formal e-waste facilities

Client :

Sustainable Recycling Industry Project implemented by Cedare

Scope :

The project aimed to improve the recycling industry especially e-waste recycling, through preparing the required environmental registers for the formal E-waste recycling facilities which include the following:
• Three Environmental Registers for the Facilities.
• Three Substances and Hazardous Waste Register.

member name

Project :

Preparing the Master Plan of Solid Waste Management for Four Governorates

Client :

National Solid Waste Management Program NSWMP

Scope :

The general scope of the project is to prepare master plan for solid waste management in Qalyoubia, New Valley, Red Sea, South Sinai and Cairo governorates including the following:
• Assess the current situation of solid waste management in each governorate including:
- The quantities of generated waste and generation rate.
- The collection and handling methods.
- Engineering assessment for the current landfills, transfer stations and waste recycling facilities.
- Assess the current hierarchy of solid waste management in the governorate.
• Analyse the results and suggest alternatives for solid waste management, the suggested alternatives should be supported by techno-economic studies.
• Prepare short term and long term strategies for solid waste management in each governorate.

member name

Project :

Engineering Supervision Services for the Rehabilitation and Upgrading of the Edwa Sorting-Composting Plant

Client :

UNDP

Scope :

The general objective of this consultancy is to provide the required monitoring of the mechanical, civil and electrical works for the rehabilitation of the Edwa Sorting-Composting Plant.
The main products of this plant will be: (i) fertilizer for agricultural activities, through the composting of organic waste, (ii) refuse derived fuel (RDF) and recyclables from the treatment of the dry fraction and, (iii) rejects to be land-filled from other fractions of MSW.

member name

Project :

Business Opportunities in the Formal Sector of Waste of Electrical Electronic Equipment WEEE Recycling

Client :

Sustainable Recycling Industry Project implemented by Cedare

Scope :

The project aims to improve the recycling industry especially e-waste recycling, through mapping of the WEEE recycling formal sector in Egypt to identify number, size, and geographic distribution of the formal industries facilities in Egypt which include several site visits for the formal facilities and interviews with the owners.

member name

Project :

Mapping of Informal Sector of Waste of Electrical Electronic Equipment WEEE Recycling

Client :

Sustainable Recycling Industry Project implemented by Cedare

Scope :

The project aims to improve the recycling industry especially e-waste recycling, through mapping of informal sector in the greater Cairo to identify its size and geographical distribution which include several site visits and interviews with informal collectors and recyclers over Greater Cairo areas.

member name

Project :

Engineering Supervision for the Solid Waste Management Offices Renovation at Four Sites

Client :

GIZ

Scope :

The general objective of this consultancy was to provide the required monitoring of the mechanical, civil and electrical works for the rehabilitation of the SWM offices located at:
• Matareya – Cairo Governorate.
• Khosous – Qalyoubia Governorate.
• Shoubra El Khema – Qalyoubia Governorate.
• Qalyoub – Qalyoubia Governorate.

member name

Project :

Rehabilitation and Upgrading of the Edwa Sorting-Composting Plant

Client :

Minya Solid Waste Management Project

Scope :

Implementation of a pilot solid waste management project aiming at strengthening the current technical, financial and organizational structure of the current waste management system in Minya, through modernizing and developing the overall waste management and recycling system with the Italian experience.
The general objective of this consultancy was to provide the following:
• Review; discuss the appropriateness and adequacy of a schematic design set by an international consultant for a recycling facility – Compost and RDF.
• Prepare the final design document including the final schematic design, Process flow, technical requirement specifications, BoQ based on best allocation of budget elements.
• Prepare the tender documents according to UNDP specifications and using FIDIC guidelines and standards.
• Manage the process of bidding and post bidding evaluations, placement and contracting based on best value for money (BVFM).

member name

Project :

Engineering Supervision Services for the Construction of Solid Waste Transfer Station

Client :

GIZ

Scope :

Engineering Supervision Services for the Construction of the Integrated Resource and Recovery Center (Solid Waste Management) and Solid Waste Transfer Station. The general objective of this consultancy was to provide the required monitoring of the mechanical, civil and electrical works of both the IRRC and Transfer station projects in El- Khanka and Khosoos cities respectively.

member name

Project :

Engineering Supervision Services for the Rehabilitation of the Old Line for the RDF, Compost and Recyclables Recovery

Client :

GIZ

Scope :

The general objective of this consultancy was to provide the required monitoring of the mechanical, civil and electrical works of the rehabilitation of the old line for the RDF, compost and recyclables recovery – Elkhanka, Qalyoubia governorate.

member name

Project :

Engineering Consultancies for NSWMP funded by the GIZ in cooperation with the Ministry of Environment

Client :

GIZ / NSWMP

Scope :

The general objective of this consultancy was to provide engineering consultancy to check and review the specs. of the new equipment of solid waste management (SWM) which was procured by NSWMP for the SWM models in four governorates.

member name

Project :

Establishing a Formal Lead Smelter using Lead Acid Batteries (El Masreya for Smelting, Refining and Manufacturing of Lead)

Client :

USAID- CAIP Project

Scope :

The general objective of this consultancy was to transfer the informal lead smelting facility to formal facility through the following:
• Developing the facility layout
• Identifying the state of the art equipment
• Designing the pollution control equipment.
• Preparing Environmental Social Impact Assessment ESIA
• Developing the technical specs of equipment.
• Managing the purchasing and installation of equipment.